How to ensure the safe construction of steel structure workshop?

With the rapid development of production and manufacturing, more and more workshops and warehouses are used, and the application of steel structures is becoming more and more extensive. As we all know, the application of steel structure in factory construction is very important. Therefore, when storing and installing steel structures, the following issues must be paid attention to to ensure the safe use of steel structure workshops.

Safe construction of steel structure workshop

1. The steel end shall be marked with the specification, quantity and material acceptance certificate number of the steel.

2. When stacking in the open air, the site should be level, the height should be higher than the surrounding ground, and there should be drainage pipes around.

3. When stacking steel structures, try to make the back of the steel section face upwards or outwards to avoid snow and water accumulation. There should be a height difference between the two ends to facilitate drainage.

4. Before the installation of the steel structure workshop, the construction unit shall conduct special inspections on the product certificates, design documents and records before assembly of the parts, and check the dimensions of the parts.

5. Appropriate connection methods should be adopted for the factory building steel structure, so that the node design is consistent with the simplified structural calculation model.

6. When lifting the steel structure, appropriate measures should be taken to prevent excessive bending and torsional deformation of the contact part between the wire rope buckle and the component, and a washer should be added to prevent the component from being injured.

7. When the factory building steel structure is in place, the supports and other connecting parts should be fastened in time to ensure its stability.

8. Aerial workers should use tools, and spare parts should be placed in tool bags instead of throwing up and down.

9. When working in rainy days, reliable anti-skid measures should be taken, and lightning protection should be paid attention to in thunderstorm season.

10. The weather conditions before construction are also very optimistic, and the construction of steel structure workshops is prohibited when there is a wind above level 4.