The steel workshop uses the lifting door to prevent wind and reduce noise

Steel structure workshops often produce relatively loud noises during production operations, thereby affecting the normal life of surrounding residents. In addition, because the production needs to be built near the water, the temperature near the water is relatively low, and the wind will be stronger. Therefore, it is very necessary to choose a lifting door that is windproof and noise-reducing.

Lifting doors are installed in the steel workshop to prevent wind and reduce noise

1. The door panel is made of 0.45mm thick double-layer color steel plate, filled with polyurethane foam inside, and the overall thickness can reach 40mm. There is a large rib device on the back, which has good windproof performance and can withstand strong winds of 8-10 levels.

2. The top and side rails of the door are equipped with EPDM sealing tape and bottom seal. When the door is completely closed, a sealed space will be formed to reduce sound transmission and effectively isolate noise, thereby achieving noise reduction effect.

The good windproof performance of the lifting door can provide safety guarantee for the steel workshop building. The sealing and noise reduction performance can effectively solve the problem of factory noise, so that it can be safely produced and increase production capacity.